Sanitiser & Barrier Protection - Hosptial Grade, provides peace of mind with its non-corrosive, non-abrasive, low-toxicity, non-flammable formula.

Fogging Sanitisation & Disinfection Services

Our Service

We offer Fogging Sanitisation services which produce a fast-evaporating fog where virtually every available surface is reached without wetting things down, safe around electronics, etc. Our fogger achieves maximum coverage of over 99% of areas that normally get missed or cross-contaminated. We use Surface Spray Disinfectant – Hospital Grade which kills 99.9% of harmful germs. High concentrations of fine fog remain in the air to give effective disinfection times. Fogging is very effective, swift and relatively inexpensive.

Get in Contact

How it Works

Fogging with disinfectant is administered through Ultra Low Volume (ULV) foggers and can achieve high levels of airborne and surface decontamination. Fogging is effective against a wide range of bacteria, viruses, fungi and spores.

This service can assist in reducing harmful bacteria, viruses and moulds on all surfaces and in the air. Sanitiser & Surface Protection kills Bacteria & Inhibits the Growth of Fungi (mould & mildew) & Algae.

Compare to Other Products

The Advantage of Our Sanitisation Product

Fogging with Sanitiser & Surface Protection offers a rapid, broad spectrum kill and persistence far longer than most disinfectants. It does this by bonding and creating a safe and long lasting transparent shield over surfaces enabling it to continue fighting germs long after application. Sanitiser & Surface Protection provides peace of mind with its non-corrosive, non-abrasive, low-toxicity, non-flammable formula.

Once applied, fogging with Sanitiser & Surface Protection helps prevent the spread of germs around the home and workplace by forming a strong bond with the surface. This ensures the active ingredients stay in place ready to work over and over again.

  • Coats & Seals for Extended Protection

  • Cleans & Prevents Mould & Mildew Stains

  • Industrial Strength Formulation

  • Non-Flammable & Non-Corrosive

Bleach and chlorine free

Sanitiser & Surface Protection is free of the harsh chemicals found in most disinfectants, such as bleach, ammonia, and chlorine. It is also phosphate free so will not contribute to phosphate pollution of soil and waterways. The powerful antimicrobial formula is readily biodegradable and environmentally friendly.

Fights mould for up to 28 days

Once applied, Sanitiser & Surface Protection forms a strong bond with the surface, ensuring the active ingredients remain in place, ready to work over and over again, creating an antimicrobial barrier.

Enquire Now

On what surfaces can the disinfectant be applied?

All surfaces. Sanitiser & Surface Protection is pH neutral so it’s safe to use on all hard surfaces including bench tops and floors, Aluminium, PVC Plastic, Stainless Steel, Wood, Linoleum, Carpet, Curtains and Fabrics, Polished Concrete, Stone and more.

Disinfectant can be fogged directly onto surfaces requiring cleaning and protection; including tables, countertops, chairs, walls, tiles, door handles, or other contact surfaces. Quick dry.

Product Testing Result

How does use of Surface Spray Disinfectant through fogging compare to competing products?

  • Protection that lasts long after application - Most dissipate within minutes

  • Forms a lasting barrier to prevent mould growth - Most have no lasting effect against mould

  • Safe and easy to apply - Others can require the use of Protective Personal Equipment (PPE)

  • Cleans and sanitises surfaces - Most only clean or sanitise, not both

  • Water-based formula - Most products are solvent based

  • Scent and dye free - Others can stain surfaces from added colouring

  • Alcohol and solvent free - Many use alcohol to sanitise surfaces

  • Safe to use on all surfaces - Others can harm and deteriorate surfaces

  • Safe to use on most fabrics - Others can damage or stain fabrics

Get in Contact

What sort of industries would fogging be suitable for?

Once applied, Surface Spray Disinfectant – Hospital Grade forms a strong bond with the surface, ensuring the active ingredients remain in place, ready to work over and over again. This persistent activity can help prevent the transmission of germs making it suitable for use in environments such as hospitals, clinics, nursing homes, cruise ships, public transport and other environments where people are in close proximity to each other for extended periods.

It is suited for a wide range of areas where sanitisation and mould control is an issue, including:

  • Public bathrooms, homes, offices, hotels or other accommodation facilities.

  • Industries where high temperature and high moisture environments create mould issues.

  • Marine vessels with canopies and other surfaces the suffer from the effects of mould.

  • Rooms with humidifiers or similar devices that increase the moisture content in the air.

  • Camping and leisure equipment that is to be stored or gets damp regularly.

  • High contact surfaces at bars and restaurants including table tops, benches and chairs.

See our Prices

What product testing has been carried out on Surface Spray Disinfectant – Hospital Grade?

The following toxicology tests have been completed. Please contact us for further details.

Safe for Customers and Employees

Toxicology Testing

  • Acute Dermal Toxicity Study OEDC 402

  • Acute Inhalation Study OEDC 403

  • Acute Dermal Irritation/Corrosion Study OEDC 404

  • Acute Eye Irritation/Corrosion Study OEDC 405

  • Acute Skin Sensitisation Study OEDC 406

  • Acute Oral Toxicity Study OEDC 425

  • Efficacy Testing

  • TGA Disinfectant Test

  • 1 Day Challenge Testing - MRSA

  • 14 Day Challenge Testing E coli, Salmonella, VRE

  • 14 Day Challenge Test - Norovirus

  • 28 Day Challenge Test - E.Coli, Salmonella, VRE

  • Hard Surface Challenge Test - Clostridium Difficile

  • Surface Testing - Aluminium - 1116.002-Al

  • Surface Testing - Aluminium - 1124.001-Al

  • Surface Testing - Carpet - 1116.002-Carpet

  • Surface Testing - Linoleum - 1116.002-Linoleum

  • Surface Testing - PVC - 1116.002-PVC

  • Surface Testing - Stainless Steel - 1116.002-Steel

  • Surface Testing - Untreated Wood - 1116.002-Wood

  • Virucidal Efficacy Suspension Test – Swine Influenza Virus (H1N1)

Prices for fogging in homes.

  • STUDIO FLAT $440

  • 1 BED FLAT $460

  • 2 BED HOUSE/FLAT $620

  • 3 BED HOUSE $690

  • 4 BED HOUSE $840

  • 5 BED HOUSE $1000

  • 6 BED HOUSE $1060

Fogging in work places.

  • Prices depending

  • Starting from $200

  • After hours call out fee $150

Get a Quote

Contact Us Now

Find out more about our service and get a free quote!

By clicking below to submit this form, you acknowledge that the information you provide will be processed in accordance with our Privacy Policy.